Accessories

The wall bracket with 'V' hook allows you to fix our fabric clothed electrical cables to the wall or ceiling.

This decentraliser is the perfect accessory for drawing curved or straight lines, horizontally or vertically, and allows you to attach the cables of a single or multiple pendant lamp to the ceiling or wall in a variable manner, or to create luminous garlands using a two-way lamp holder.
This decentraliser is the perfect accessory for drawing curves or straight lines, horizontally or vertically. Choose the finish that best matches the style of your indoor space: if you prefer a concealed effect, the transparent finish will be perfect!

Suitable for cables of up to 8mm cross-section and is fully compatible with all our fabric covered lighting cables..
Package includes screw and wall plug.

Warning! This product is not suitable for large section cables or nautical cords.

The ceiling decentraliser is used to shift the drop of a pendant lamp in relation to the ceiling rose or to hook a cable to the ceiling.

The catch screw ensures a secure grip and stops the cable from sliding. Choose the finish that best matches the style of your indoor space: if you prefer a concealed effect, the transparent finish will be perfect!

Suitable for cables of up to 8mm cross-section and is fully compatible with all our fabric covered lighting cables..
Package includes screw and wall plug.

Warning! This product is not suitable for large section cables or nautical cords.

The universal fairlead is a vital accessory when it comes to attaching fabric cables to walls or ceilings.

This cable clamp is a small accessory that hand-in-hand with our colourful fabric cables will help you design a creative and fun solution. Choose the finishing that best complements your indoor spaces: if you prefer a concealed effect, the clear finish will be perfect!

Compatible with cables with a maximum section of 7mm, this cable clamp for fabric cables is perfectly compatible with all of our cables in fabric covering.

Pack contains 2 pieces.

Creative-Cables was born in Turin, Piedmont, and in Piedmontese "Sarè" means to tighten, close, screw. Could there be a more suitable name for the new addition to the decentraliser range? The Sarè metal cable clip is the ideal accessory for fixing the fabric cables for the lighting solutions you jave chose for the wall or ceiling.
Thanks to this tiny accessory you can create linear or creative designs with our cables and bring light to places where it is lacking.

Made of aluminium, with its distinctive embossed knurling on the cap and its small size, the Sarè decentraliser is available in all the glossy and satin metallic finishes of the Creative-Cables range of components: combine it with ceiling roses, lamp holders, cable clamps and extensions to create lamps and lighting solutions tailored to your needs and style.

Thanks to the adjustable screw catch this cable clamp is suitable to hold all diameters of 2 or 3-pole cables, both round and stranded. In its brass finish it has the elegance of a gold button: we suggest using it with Vertigo HD cables to create an original optical effect.

Warning! This product is not suitable for large section cables or nautical cords.

Pack contains 2 pieces.

Cable clamp for fixing textile electrical cables to lamp holders and ceiling rose of any kind and material.

Make your ceiling and lamp holders unique by matching this plastic conical cable clamp to a finish of your choice.

The Rolé wooden cable entry is a wall attachment perfect to obtain a beautiful illumination for your indoor spaces.

Rolé is 100% made out of wood and is an authentic Made in Italy product. It's available in four different finishes. Natural White or Black beechwood popular for its brighter surface, whilst the ashwood option with wengé effect has a darker tone, leaning towards black and purple colourings.

The Rolé cable entry is a versatile accessory that can be used in multiple situations. It can be used to decentralise the suspension lamp, or, thanks to the use of a series of cable entries, you will be able to project patterns and other installations on your walls by really stretching the cable from one entry to the next. Or, on a different note, use Rolé as a coat hanger!
Rolé is easy to install thanks to the special wall mounting accessories included in the kit.

Attention the piece for wall mounting included in the kit is onyl compatible with brick and concrete walls and not with drywall.

Porcelain insulator to fix twisted cables to the wall or ceiling.
Ideal for exposed electrical systems, available in two colours: white and black.

Note: screw and dowel not included

Make your ceiling rose and lamp holders even more elegant by using the metal cable clamp with cylindrical dowel.

Complete with threaded tube, nut and washer, it adapts to any lamp holder and rose.

The cylindrical metal cable clamp is available in all glossy or satin metal finishes from the Creative-Cables component range: choose the one that best matches the lamp you wish to assemble.

Pack contains 2 pieces.

The wall decentralizer with wooden 'V' hook allows you to fix our fabric covered electrical cables to the wall or ceiling.
This decentralizer is the perfect accessory for drawing curves or straight horizontal or vertical lines and allows the cables of a single or multiple pendant lamp to be attached to the ceiling or wall in a variable manner.

Wood, crafted in Italy, is a material that can evoke many styles of interior design, from Scandinavian to shabby, or even country and nautical styles. The brighter, natural wood finishinging will suit those who prefer a more rustic effect, while the darker, wenge-effect finishinging is be perfect for more elegant environments.

Suitable for cables up to 8mm in cross-section and is fully compatible with all our fabric covered lighting cables.
Package includes screw and wall plug.

Warning! This product is not suitable for large cross-section cables or nautical cords.

Threaded tubes, lot of 10.
Available sizes: 10 mm,15 mm, 20 mm, 25 mm

The kit includes 2 threaded pipes (TIGE) M10x1 h. 25mm and 4 nuts.

The metal extension tubes serve to creatively customise a ceiling or table lamp. Mounted next to a ceiling rose or metal lamp holder, they enhance a pendant lamp, while applied to a Posaluce they increase its overall Length and transform it into a sleek table lamp.

This accessory is available in 6 lengths from 5 to 30 cm and in all metallic finishes, polished or satin, from the Creative Cables component range.

The tube has an M10x1 thread for rods or cable clamps (NOT INCLUDED) at both ends.

Make your ceiling rose and lamp holders even more elegant by using the cable clamp with cylindrical plastic dowel.

Complete with threaded tube, nut and washer, it adapts to any lamp holder and ceiling rose.

The connection kit for suspension with flush-mounted ceiling rose enables fast and secure connections.

The plastic box acts as insulation, protecting the connectors inside. It is also equipped with two cable clamps, one on each side, which ensure the safety and solidity of the cables in the event of any external stresses.

By concealing the connection inside the plasterboard ceiling, you can replace a classic ceiling rose with the recessed one and have a simple and minimalist connection.

Pinocchio is not just a wall bracket: it is a Creative-Cables solution to hang any lamp by adjusting the distance from the wall.

Pinocchio has been designed to allow the passage of lamps that are already wired: the cable does not have to pass through holes but is wound around the knurled wooden supports that are inserted at both ends.
The arm (or nose) is mobile and can be fixed at three different Lengths to allow the desired aesthetic result.
Pinocchio's arm (or nose?) is mobile and can be fixed at three different Lengths to permit the wished aesthetic result.

Pinocchio allows to mount lamps and lampshades up to a maximum diameter of 50 cm.
Made of 100% beech wood in Italy, Pinocchio is available in a neutral wood finish, which can be painted as desired, or in a painted wood version.

Designed to create unique wall or ceiling decorations, Filé is Creative-Cables’ system for expertly handling string light cables.
Match the wooden wall fairlead with other products from the Filé system: a canopy, a lamp holder and a terminal block. All components are Italian made.
Choose the finish that best suits your needs: the black and white coatings will allow you to create a minimal look, while the natural version will be perfect for more Scandinavian inspirations.

The kit includes a wooden rose diameter 50 mm and a dowel with screw for ceiling or wall fastening.

Thanks to this simple accessory in untreated neutral wood., you can regulate easily the height of any suspension lamp.
You can also use it to create drawings and give more evidence to the colors of the fabric cable.
Compatible with all our fabric covered cables 2x0,75 and 3x0,75.
100% Made in Italy.

Choose the economy packaging from the menu to have the best price!

Archet(To) is Creative-Cables patented and made in Italy solution to create a suspended lamp that can be hung wherever you want. Its shape that resembles an arch (a bracket? A smile?) makes it possible to hang a lamp onto a wall, even with a lampshade with a 70 cm maximum diameter and a 3,365 maximum weight: Archet(To) bends according to the weight it is bearing!
It won’t be difficult to find a nice spot for Archet(To): thanks to its light structure in transparent polycarbonate, it will easily suit any environment.
To make it work, you do not need a nearby socket: just choose a Creative-Cables wiring kit, such as Snake, selecting the colour you prefer among the more that 100 shades available.
To mount Archet(To) on a wall lightpoint, you may want to use the designated bases.

Attention! Light bulb, wooden accessories and cable not included.

Lumet System is the solution by Creative-Cables created specifically to illuminate gardens, terraces and gazebos!

This hook in galvanized metal and black thermoplastic is specifically designed to compose your Lumet string lights on your own.

It is used to hang your Lumet string lights from railings, wall hooks and other various support, making installation and removal of the catenary quick and easy.

Designed to create unique wall or ceiling decorations, Filé is Creative-Cables’ system for expertly handling string light cables.
Match the wooden terminal block with other products from the Filé system: a wall fairlead, a lamp holder and a canopy. All components are Italian made.
Choose the finish that best suits your needs: the black and white coatings will allow you to create a minimal look, while the natural version will be perfect for more Scandinavian inspirations.

The kit includes a wooden terminal block of 50 mm diameter with a 20 mm hole, a dowel with screw for ceiling of wall fastening.

The industrial touch of this metal cage is perfect for stylishly protecting the bulbs in Harbour lampshades. Ideal for any environment, indoor or outdoor.

Not just aesthetic: its sturdy structure ensures that the light bulb is safe from accidental knocks, while also ensuring optimal light diffusion. The dimensions of this metal cage, 400 mm in diameter and 95 mm in height, make it a versatile product, suitable not only for the Harbour lampshade by Creative Cables, but also for many others.

These metal clips are compatible with 16mm diameter XL rope cables.

This small accessory allows you to easily fix the rope cable to the wall or ceiling at a point of your choice, to create unique and creative designs and installations.

The tie clip wraps the rope cable and clasps to itself, allowing you to obtain a clean look with one movement, even in the most difficult places to reach.

The bent 14cm-long metal extension tube is used to creatively customise a wall lamp. Applied to a wall rose, it allows you to direct the lamp holder upwards or downwards, creating different light distribution effects within your environment.

This accessory is available in all the glossy or satin metallic finishes of the Creative-Cables range of components: choose the one that best matches the lamp you wish to assemble.

The tube has an M10x1 thread for rods or cable clamps (NOT INCLUDED) at both ends.

An encounter between style and functionality: the matte metal cage for the Bistrot lampshade is an accessory in which industrial style and protection merge into an aesthetic that integrates into various indoor or outdoor settings.

Thanks to its sturdy structure, this product ensures that the bulb is safe from accidental impacts, while also guaranteeing even light distribution. The compact dimensions, with a diameter of 310 mm and a height of 85 mm, make it suitable for a wide range of lampshades, as well as being the ideal complement to our exclusive Bistrot lampshade.

Embellish your ceiling roses and lamp holders with the 7cm-long cable clamp with cylindrical metal dowel.

Thanks to its colour and size, this cable clamp makes a striking visual impact and can be an additional decorative touch to any suspension.
Complete with threaded tube, nut and washer, it will fit any lamp holder and ceiling rose.

The 7 cm cylindrical metal cable clamp is available in all glossy or satin metal finishes from the Creative-Cables component range: choose the one that best matches the lamp you wish to assemble.

This universal wire stripper is the easy and effective tool that will help you make your lighting projects faster to complete and forget about the stress and worry of damaging cables.

Compatible with all our round, fabric-covered cables, this wire stripper features multiple blades that allow you to unsheathe, cut and strip cables in one easy step.

The blade in the middle position enables to make a clean cut (2) on the cable, by removing any excess. The knob on the top of the tool allows the blade to be adjusted to unsheathe (1), while the mirror blades on the back of the tool allow to strip (3) the cable.
The wire stripper is also equipped with a blade refill, which is located at the top of the tool.

Lumet System is the solution by Creative-Cables created specifically to illuminate gardens, terraces and gazebos!

This wall fixture accessory is specifically designed to compose your string lights on your own. It is used to fix the cable firmly on a smooth surface, allowing you to run the cable where you desire.

They are used to permanently fix the catenary cable on a smooth surface.

Attention! Screws are not included.

Embellish ceiling roses and lamp holders using the 15cm-long cable clamp with cylindrical metal dowel.

Thanks to its colour and size, this cable clamp makes a striking visual impact and can be an additional decorative touch to any suspension.
Complete with threaded tube, nut and washer, it will fit any lamp holder and ceiling rose.

The 15cm cylindrical metal cable clamp is available in all glossy or satin metal finishes from the Creative-Cables component range: choose the one that best matches the lamp you wish to assemble.

The adjustable metal joint is the ideal element to complete your DIY lamp with a little extra touch!

This accessory will allow your lamp to tilt up to 90° and rotate by 315°: this will make it possible to direct the light wherever you want according to your needs.

The perfect solution for enriching and making wall lamps more functional, our articulated pipe is available in different finishes: choose the one that best suits your project and complete your lamp.

The terminal is made of beech wood crafted in Italy. Wood is a natural material that can evoke very different styles: Scandinavian, shabby, country, nautical and many more!

The wooden terminal is suitable for light installations with our 24mm diameter 2XL cords with 2x0.75 internal electrical cable and can be used both as a closing part of the terminal and as a cable clamp for 2XL cords.

Natural wood can be painted or varnished to suit your needs and creative projects..
The kit includes a terminal with a diameter and a hole, a threaded rod, 2 nuts and a washer.

Warning! The terminal is only compatible with our 2XL twisted cables with a diameter of 24mm and internal jute electrical cord 2x0.75.

These metal clips are compatible with 24mm diameter 2XL rope cables.

This small accessory allows you to easily fix the rope cable to the wall or ceiling at a point of your choice, to create unique and creative designs and installations.

The tie clip wraps the rope cable and clasps to itself, allowing you to obtain a clean look with one movement, even in the most difficult places to reach.

Pinocchio is not a simple wall bracket: it is Creative-Cables' solution to hang any lamp, which not only allows you to adjust the distance of the light source from the wall, but also to regulate the rotation of the extendable arm.

Pinocchio XL is made in Italy in zero-km beech carved in Turin, that can be impregnated or painted with the colour you want. And if you wish to add a lampshade, you can complete your installation with the wall brackets included in the kit. Thanks to the groove in the last rod, the cable remains locked in a safe position.

Pinocchio XL is the ideal wall fixture to create perfect wall lamps to illuminate the reading corner of a living room and any other room by always giving an original and unique touch, not only because of its shape, but also for the length adjustment function that allows you to adapt the light to any situation.

Zigh-Zagh is the ceiling support that allows you to create original pendant lamps, not only because of its shape, but also because of the length adjustment function that allows you to adapt the light to every situation.

Zigh-Zagh is made in Italy, in zero-km beech wood carved in Turin, which can be impregnated or painted with whichever colour you like. Wood is a natural material able to evoke very different styles: Scandinavian, shabby, country, industrial, nautical and many others! Thin transparent wires are used to attach it to ceiling hooks, both included in the kit.

Zigh-Zagh is the ideal ceiling fixture to create perfect suspension lamps to illuminate kitchen islands, dining tables and any other room always giving a modern and unique touch.

Taché, in Piedmontese it means "to attach" or "to fix", is the creative support for light bulb that allows you to transform a G125 light bulb into an original table lamp. Designed by Fabrizio Alessio, Taché is inspired by one of the most beloved objects of the design world: the paper clip, patented by William Middlebrook in 1899.

Designer Fabrizio Alessio has imagined to adapt Middlebrook's idea to the world of lighting, by drawing from its elegance and simplicity: just as the paper clip staples sheets of paper, Taché's super-light structure can staple the globe of any G125 bulb, leaving it suspended and in view.

The Taché consists of two mirrored arms with an aluminium wire frame covered with a braid made from the fabric of our cables and two elegant Made in Italy wooden feet. As well as a decorative function, the covering sleeve protects the bulb's surface. The extra idea: complete your Taché with one of our SnakeBis ready-to-use cables to create a practical, modern and creative designer table lamp.

Cage is a simple yet revolutionary component to create modular lamps in true Creative Cables style.

Made out of 6 elements, easy to assemble, Cage is a round structure that cages the cables creating scenographic and original shapes, real floating sculptures.

You can use Cage separately or with multiple combinations.The possibilities of creating suspension lamps in different shapes are truly endless!

You will be able to switch up your lamp's shape and appearance as many times as you want, by simply adjusting the Cage's position or by adding more structures to it.

Cage is available in two sizes (Ø 40 cm e 60cm) and in 3 colours: black and white in recycled plastic and transparent in polycarbonate . The choice of pairing your new lamp with our 2x0.75 e 3x0,75 cables is up to you!

A tip from us... use different coloured cables for a truly striking effect!

Patented. Designed by Marcello Ziliani.

Cage is a simple yet revolutionary component to create modular lamps in true Creative Cables style.

Made out of 4 elements, easy to assemble, Cage is a squared structure that cages the cables creating scenographic and original shapes, real floating sculptures.

You can use Cage separately or with multiple combinations.The possibilities of creating suspension lamps in different shapes are truly endless!

You will be able to switch up your lamp's shape and appearance as many times as you want, by simply adjusting the Cage's position or by adding more structures to it.

Cage is available in two sizes (Ø 34cm e 48) and in 3 colours: black and white in recycled plastic and transparent in polycarbonate . The choice of pairing your new lamp with our 2x0.75 e 3x0,75 cables is up to you!

A tip from us... use different coloured cables for a truly striking effect!

Patented. Designed by Marcello Ziliani.