Accessories

The wall bracket with 'V' hook allows you to fix our fabric clothed electrical cables to the wall or ceiling.

This decentraliser is the perfect accessory for drawing curved or straight lines, horizontally or vertically, and allows you to attach the cables of a single or multiple pendant lamp to the ceiling or wall in a variable manner, or to create luminous garlands using a two-way lamp holder.
This decentraliser is the perfect accessory for drawing curves or straight lines, horizontally or vertically. Choose the finish that best matches the style of your indoor space: if you prefer a concealed effect, the transparent finish will be perfect!

Suitable for cables of up to 8mm cross-section and is fully compatible with all our fabric covered lighting cables..
Package includes screw and wall plug.

Warning! This product is not suitable for large section cables or nautical cords.

The ceiling decentraliser is used to shift the drop of a pendant lamp in relation to the ceiling rose or to hook a cable to the ceiling.

The catch screw ensures a secure grip and stops the cable from sliding. Choose the finish that best matches the style of your indoor space: if you prefer a concealed effect, the transparent finish will be perfect!

Suitable for cables of up to 8mm cross-section and is fully compatible with all our fabric covered lighting cables..
Package includes screw and wall plug.

Warning! This product is not suitable for large section cables or nautical cords.

The universal fairlead is a vital accessory when it comes to attaching fabric cables to walls or ceilings.

This cable clamp is a small accessory that hand-in-hand with our colourful fabric cables will help you design a creative and fun solution. Choose the finishing that best complements your indoor spaces: if you prefer a concealed effect, the clear finish will be perfect!

Compatible with cables with a maximum section of 7mm, this cable clamp for fabric cables is perfectly compatible with all of our cables in fabric covering.

Pack contains 2 pieces.

Creative-Cables was born in Turin, Piedmont, and in Piedmontese "Sarè" means to tighten, close, screw. Could there be a more suitable name for the new addition to the decentraliser range? The Sarè metal cable clip is the ideal accessory for fixing the fabric cables for the lighting solutions you jave chose for the wall or ceiling.
Thanks to this tiny accessory you can create linear or creative designs with our cables and bring light to places where it is lacking.

Made of aluminium, with its distinctive embossed knurling on the cap and its small size, the Sarè decentraliser is available in all the glossy and satin metallic finishes of the Creative-Cables range of components: combine it with ceiling roses, lamp holders, cable clamps and extensions to create lamps and lighting solutions tailored to your needs and style.

Thanks to the adjustable screw catch this cable clamp is suitable to hold all diameters of 2 or 3-pole cables, both round and stranded. In its brass finish it has the elegance of a gold button: we suggest using it with Vertigo HD cables to create an original optical effect.

Warning! This product is not suitable for large section cables or nautical cords.

Pack contains 2 pieces.

Cable clamp for fixing textile electrical cables to lamp holders and ceiling rose of any kind and material.

Make your ceiling and lamp holders unique by matching this plastic conical cable clamp to a finish of your choice.

The Rolé wooden cable entry is a wall attachment perfect to obtain a beautiful illumination for your indoor spaces.

Rolé is 100% made out of wood and is an authentic Made in Italy product. It's available in four different finishes. Natural White or Black beechwood popular for its brighter surface, whilst the ashwood option with wengé effect has a darker tone, leaning towards black and purple colourings.

The Rolé cable entry is a versatile accessory that can be used in multiple situations. It can be used to decentralise the suspension lamp, or, thanks to the use of a series of cable entries, you will be able to project patterns and other installations on your walls by really stretching the cable from one entry to the next. Or, on a different note, use Rolé as a coat hanger!
Rolé is easy to install thanks to the special wall mounting accessories included in the kit.

Attention the piece for wall mounting included in the kit is onyl compatible with brick and concrete walls and not with drywall.

Porcelain insulator to fix twisted cables to the wall or ceiling.
Ideal for exposed electrical systems, available in two colours: white and black.

Note: screw and dowel not included

Make your ceiling rose and lamp holders even more elegant by using the metal cable clamp with cylindrical dowel.

Complete with threaded tube, nut and washer, it adapts to any lamp holder and rose.

The cylindrical metal cable clamp is available in all glossy or satin metal finishes from the Creative-Cables component range: choose the one that best matches the lamp you wish to assemble.

Pack contains 2 pieces.

The wall decentralizer with wooden 'V' hook allows you to fix our fabric covered electrical cables to the wall or ceiling.
This decentralizer is the perfect accessory for drawing curves or straight horizontal or vertical lines and allows the cables of a single or multiple pendant lamp to be attached to the ceiling or wall in a variable manner.

Wood, crafted in Italy, is a material that can evoke many styles of interior design, from Scandinavian to shabby, or even country and nautical styles. The brighter, natural wood finishinging will suit those who prefer a more rustic effect, while the darker, wenge-effect finishinging is be perfect for more elegant environments.

Suitable for cables up to 8mm in cross-section and is fully compatible with all our fabric covered lighting cables.
Package includes screw and wall plug.

Warning! This product is not suitable for large cross-section cables or nautical cords.

Threaded tubes, lot of 10.
Available sizes: 10 mm,15 mm, 20 mm, 25 mm

The kit includes 2 threaded pipes (TIGE) M10x1 h. 25mm and 4 nuts.

The metal extension tubes serve to creatively customise a ceiling or table lamp. Mounted next to a ceiling rose or metal lamp holder, they enhance a pendant lamp, while applied to a Posaluce they increase its overall Length and transform it into a sleek table lamp.

This accessory is available in 6 lengths from 5 to 30 cm and in all metallic finishes, polished or satin, from the Creative Cables component range.

The tube has an M10x1 thread for rods or cable clamps (NOT INCLUDED) at both ends.

Make your ceiling rose and lamp holders even more elegant by using the cable clamp with cylindrical plastic dowel.

Complete with threaded tube, nut and washer, it adapts to any lamp holder and ceiling rose.

The connection kit for suspension with flush-mounted ceiling rose enables fast and secure connections.

The plastic box acts as insulation, protecting the connectors inside. It is also equipped with two cable clamps, one on each side, which ensure the safety and solidity of the cables in the event of any external stresses.

By concealing the connection inside the plasterboard ceiling, you can replace a classic ceiling rose with the recessed one and have a simple and minimalist connection.

Pinocchio is not just a wall bracket: it is a Creative-Cables solution to hang any lamp by adjusting the distance from the wall.

Pinocchio has been designed to allow the passage of lamps that are already wired: the cable does not have to pass through holes but is wound around the knurled wooden supports that are inserted at both ends.
The arm (or nose) is mobile and can be fixed at three different Lengths to allow the desired aesthetic result.
Pinocchio's arm (or nose?) is mobile and can be fixed at three different Lengths to permit the wished aesthetic result.

Pinocchio allows to mount lamps and lampshades up to a maximum diameter of 50 cm.
Made of 100% beech wood in Italy, Pinocchio is available in a neutral wood finish, which can be painted as desired, or in a painted wood version.

Designed to create unique wall or ceiling decorations, Filé is Creative-Cables’ system for expertly handling string light cables.
Match the wooden wall fairlead with other products from the Filé system: a canopy, a lamp holder and a terminal block. All components are Italian made.
Choose the finish that best suits your needs: the black and white coatings will allow you to create a minimal look, while the natural version will be perfect for more Scandinavian inspirations.

The kit includes a wooden rose diameter 50 mm and a dowel with screw for ceiling or wall fastening.

Thanks to this simple accessory in untreated neutral wood., you can regulate easily the height of any suspension lamp.
You can also use it to create drawings and give more evidence to the colors of the fabric cable.
Compatible with all our fabric covered cables 2x0,75 and 3x0,75.
100% Made in Italy.

Choose the economy packaging from the menu to have the best price!

Archet(To) is Creative-Cables patented and made in Italy solution to create a suspended lamp that can be hung wherever you want. Its shape that resembles an arch (a bracket? A smile?) makes it possible to hang a lamp onto a wall, even with a lampshade with a 70 cm maximum diameter and a 3,365 maximum weight: Archet(To) bends according to the weight it is bearing!
It won’t be difficult to find a nice spot for Archet(To): thanks to its light structure in transparent polycarbonate, it will easily suit any environment.
To make it work, you do not need a nearby socket: just choose a Creative-Cables wiring kit, such as Snake, selecting the colour you prefer among the more that 100 shades available.
To mount Archet(To) on a wall lightpoint, you may want to use the designated bases.

Attention! Light bulb, wooden accessories and cable not included.

Lumet System is the solution by Creative-Cables created specifically to illuminate gardens, terraces and gazebos!

This hook in galvanized metal and black thermoplastic is specifically designed to compose your Lumet string lights on your own.

It is used to hang your Lumet string lights from railings, wall hooks and other various support, making installation and removal of the catenary quick and easy.

Designed to create unique wall or ceiling decorations, Filé is Creative-Cables’ system for expertly handling string light cables.
Match the wooden terminal block with other products from the Filé system: a wall fairlead, a lamp holder and a canopy. All components are Italian made.
Choose the finish that best suits your needs: the black and white coatings will allow you to create a minimal look, while the natural version will be perfect for more Scandinavian inspirations.

The kit includes a wooden terminal block of 50 mm diameter with a 20 mm hole, a dowel with screw for ceiling of wall fastening.

The industrial touch of this metal cage is perfect for stylishly protecting the bulbs in Harbour lampshades. Ideal for any environment, indoor or outdoor.

Not just aesthetic: its sturdy structure ensures that the light bulb is safe from accidental knocks, while also ensuring optimal light diffusion. The dimensions of this metal cage, 400 mm in diameter and 95 mm in height, make it a versatile product, suitable not only for the Harbour lampshade by Creative Cables, but also for many others.

These metal clips are compatible with 16mm diameter XL rope cables.

This small accessory allows you to easily fix the rope cable to the wall or ceiling at a point of your choice, to create unique and creative designs and installations.

The tie clip wraps the rope cable and clasps to itself, allowing you to obtain a clean look with one movement, even in the most difficult places to reach.

The bent 14cm-long metal extension tube is used to creatively customise a wall lamp. Applied to a wall rose, it allows you to direct the lamp holder upwards or downwards, creating different light distribution effects within your environment.

This accessory is available in all the glossy or satin metallic finishes of the Creative-Cables range of components: choose the one that best matches the lamp you wish to assemble.

The tube has an M10x1 thread for rods or cable clamps (NOT INCLUDED) at both ends.

An encounter between style and functionality: the matte metal cage for the Bistrot lampshade is an accessory in which industrial style and protection merge into an aesthetic that integrates into various indoor or outdoor settings.

Thanks to its sturdy structure, this product ensures that the bulb is safe from accidental impacts, while also guaranteeing even light distribution. The compact dimensions, with a diameter of 310 mm and a height of 85 mm, make it suitable for a wide range of lampshades, as well as being the ideal complement to our exclusive Bistrot lampshade.